Plug the micro-USB cable into the DualShock 4 controller, then connect it to the PS5 via one of its USB ports. Press and hold the PlayStation button centered between the analog sticks on the controller. Wait for the lights to flash; your controller should now be linked to your PS5. After connecting the DualShock 4 controller to a PS5, you can Try turning on the Console via the Controller. With the controller connected via USB cable after this reset process, the PS4 should pair it automatically, even though it's on wired connection. Can simply google "Reset PS4 Controller" to find more info. Connect the secondary account to PS4 Remote Play. After the controller automatically deactivates, turn it on by pressing the PS button and log-in to your primary account through the Remote Play Turn on your PS5 controller by pressing the PS button in the center of the controller. Press and hold the “Create” and “PS” buttons on the controller until the light bar on the controller begins to flash. On your PC, go to “Settings” > “Devices” > “Bluetooth & other devices” and turn on Bluetooth. Wait for the controller to be reset and then resync it again by pressing the PS and share button together. Once your controller is connected, it will no longer blink the blue light. But if your PS4 controller is still blinking blue light, try the next solution. 2. Pair in Bluetooth mode. Other things to check: try different USB ports (windows should ding with HW recognized at least), try a different cable, make sure PS4 is totally off when trying to use the controller plugged into your PC. 1. [deleted] OP • 5 yr. ago. Below are the steps I have gone through: Press and hold the Share and Plastation Button until the controller is in pairing mode. Right click the CSR Bluetooth Icon in the task bar on my computer. Naviagte to Add Bluetooth Device-All. Computer searches for bluetooth device - Does not find controller. Turn the PS4 controller around and you will see a small hole on the back. This is located next to the upper left side. Insert the object and you should feel a button being pushed. Hold the button for about three seconds and you should hear two beeps. Remove the object. This should also turn off the controller. 1L1K.

can t connect ps4 controller to ps4 after connecting to pc